Solar
Production benchmarking, use timing, weather-expected performance and inverter clipping.
- Specific yield versus nearby Sunsynk systems
- Self-sufficiency, export and storage opportunity
- Clipping events before chasing hardware upgrades
Sunsynk Report Platform
Get a clear 30-day performance report for your Sunsynk system
Sign in with your Sunsynk account, spend one credit, and get a clear plant performance PDF: what happened, optional savings with your tariff, where you can improve, and what to do next.
98.4%
Data coverage
£186
Sample month savings
52
System score
£2.99
From per credit
Figures above are from an illustrative sample report, except pricing.
Report features
See what a 30-day report covers
Scroll to move through each chapter, or tap a tab to jump ahead. Tap a tab to explore each chapter.
Executive overview in one place
Score, top issue, savings hint and recommended actions, so you know what happened and what to do next without decoding raw inverter charts.
- Clear verdict for the last ~30 days
- Coverage and accuracy called out up front
- Shareable PDF for you or your installer
Estimated savings versus the grid
See the financial benefit of solar and battery when you save a tariff: grid costs avoided and self-supplied energy in plain language.
- Self-supplied energy and grid cost avoided
- Solar vs battery contribution
- Optional when a tariff is saved in Settings
One clear system performance score
See which categories lift or drag the overall score, with the strongest and weakest areas called out.
- Self-sufficiency, solar, battery, evening grid
- Strongest and weakest areas highlighted
- Energy flows summarised for the month
Prioritised next steps
Findings consolidate into a ranked plan: behavioural changes, configuration improvements and hardware upgrades.
- Behaviour: shift loads while solar or battery cover
- Configuration: reserve and discharge timing
- Hardware: only after scheduling is reviewed
Trust
Coverage, plant details and accuracy
Every report shows how complete the telemetry was, what is installed, and whether energy flows balance. Figures below are from an illustrative sample report.
Data coverage
98.4%
Missing or low-quality periods are flagged so you know what may affect accuracy.
Plant details
5.2 kWp · 5 kW inverter
Location, inverter, PV capacity and installed equipment are listed up front.
System accuracy
Within tolerance
Inverter measurements are checked so energy flows reconcile within acceptable limits.
Savings
Estimated savings versus the grid
See the financial benefit delivered by solar and battery, broken into grid costs avoided and self-supplied energy. Optional when you save a tariff in the app.
Illustrative sample month
£186
Estimated savings versus all-grid electricity
- Self-supplied energy612 kWh
- Grid cost avoided£168
- Solar contribution68%
- Battery contribution32%
Health
One clear system performance score
See which categories lift or drag the overall score, with the strongest and weakest areas called out. Scores below are from an illustrative sample report.
Illustrative overall score
52
Weakest: self-sufficiency · Strongest: battery health
Energy summary covers solar generation, site consumption, grid import and export, and battery charge and discharge for the month.
Sample report
With a report versus without
An executive verdict with savings and next steps, not raw inverter charts you have to decode yourself. Scores and kWh figures below are illustrative.
With a Sunsynk Report
Clear answers from about 30 days of readings.
Working, but 65 pts below the local median
Closing the efficiency gap could avoid about 439 kWh of grid import per month.
- Executive overview
Score, top issue, savings hint and recommended actions in one place.
- Trusted readings
Coverage quality and accuracy checks called out clearly.
- Solar and battery depth
Peers, timing, clipping and battery use explained in homeowner language.
- Evening cost focus
How well stored energy cuts grid import when rates are often highest.
- Prioritised PDF
Behaviour, configuration and hardware actions ranked by impact.
Without a report
Raw inverter dashboards, no verdict.
- No executive verdict
Hard to tell if the system is truly doing its job.
- Unclear data quality
Gaps and inconsistencies stay buried in charts.
- No savings picture
No estimate versus all-grid electricity.
- No ranked inefficiencies
Solar, battery and evening issues compete without priority.
- Nothing clear to act on
No shareable plan for you or your installer.
What's in the report
Solar, battery and evening analysis
The report groups technical chapters so you can see what is holding performance back without reading sixteen separate titles first.
Battery
Operating indicators plus the detailed evidence behind utilisation, cycling and temperature.
- How effectively the battery is being used
- State of charge patterns and lifespan factors
- Daily trends that explain each assessment
Evening cost
Evening grid dependency when electricity is often most expensive.
- How stored energy cuts evening grid import
- Scheduling and configuration opportunities
- Where evening demand still leans on the grid
Actions
Prioritised next steps
Findings consolidate into a ranked plan: behavioural changes, configuration improvements and hardware upgrades.
Behaviour
- Shift heavy evening loads earlier while solar or battery cover is available
- Review habit patterns that drive peak grid import
Configuration
- Adjust battery reserve and discharge timing for evening peaks
- Tighten export and self-use settings before buying more capacity
Hardware
- Consider storage or PV only after clipping and scheduling are reviewed
- Share the PDF with your installer when an upgrade case is clear
Assumptions, measured versus estimated values, analysis scope and disclaimers appear in Important Information at the end of every report.
How it works
From sign-in to your PDF
No subscription. One credit equals one 30-day report. Credits never expire.
01
Sign in
Use your Sunsynk email and password. Accept Terms and Privacy once.
02
Buy credits
Choose Starter, Classic, or Pro. Checkout with Stripe when you need a report.
03
Generate a report
Pick a plant. Optionally include estimated savings with a tariff saved in Settings.
04
Preview and download
Open the PDF when it is ready. Download it, or leave feedback from your report history.
Value
Professional insight at a fraction of the cost
Compare a typical remote professional solar health check with a data-led performance report from your Sunsynk system.
Typical remote professional check
£100-£150
Sunsynk Performance Report
£2.99
per credit · from £2.99
This report gives performance insight from your system data from £2.99 per credit, covering battery health, clipping, faults, and savings where available.
It is not a substitute for an on-site inspection.
Pricing
Credit packs for every report
One credit equals one report. Credits never expire. No subscription. Unused credits can be refunded within 14 days of purchase.
Starter
£2.99
£2.99 per credit
1 report credit
- 1 performance report
- Credits never expire
- Secure checkout via Stripe
Most Popular
Classic
£7.49
£2.50 per credit
3 report credits
- 3 performance reports
- Credits never expire
- Secure checkout via Stripe
Best Value
Pro
£11.49
£1.92 per credit
6 report credits
- 6 performance reports
- Credits never expire
- Secure checkout via Stripe
Prices shown in British pounds. Secured by Stripe. Credits never expire. Unused credits refundable within 14 days of purchase.
FAQ
Answers about reports and credits
Sign-in, credits, tariffs, and what a report covers.
What is inside a Sunsynk Performance Report?
A shareable PDF from about 30 days of plant readings. It moves from an executive overview into data coverage, optional estimated savings, overall health, energy flows, solar and battery analysis, evening grid dependency, accuracy checks, and prioritised recommendations.
Is there a subscription?
No. One credit equals one report. Buy Starter (1), Classic (3), or Pro (6) when you need them. Credits never expire. Unused credits from a purchase can be refunded within 14 days via the Credits page.
Can I trust the data?
Before generation, the app checks about 30 days of telemetry coverage and asks you to confirm if coverage is thin. Each report also includes data coverage, plant details, and a system accuracy check. Assumptions and limitations sit in Important Information in the PDF.
Who is the report for?
Sunsynk account holders. Sign in with your Sunsynk email and password. Installers may also use the PDF when supporting a homeowner aftercare conversation.
How does report generation work?
Sign in at app.sunsynkreports.com, buy credits if your balance is zero, optionally save a tariff under Settings for estimated savings, then generate a report for a plant. You can leave the page while it prepares; when ready, preview and download the PDF. One credit is used per report.
Get started
Get a clear view of your system’s last 30 days.
From £2.99 · R69.99 · $4.29. Credits never expire. Secure Stripe checkout.